Create a new project

If you want to use domoio in your project, you'll need to build this library or download a precompiled binary. Check out the releases page to download the latest version, or read below the compile instructions.

Requirements

The project layout should looks like this: 


sample_project
|-- domoio.h
|-- libdomoio.a
|-- makeEspArduino.mk
|-- Makefile
|-- sample_project.ino

Setup the Makefile

Create a valid Makefile. Check out the dir examples/makefiles for examples. Visit https://github.com/plerup/makeEspArduino for more information about the parameters.

Upload certificates

Each domoio device require unique pair of rsa keys. You have to generate and flash these keys just one time per device. 

mkdir root_fs && cd root_fs
openssl genrsa -out server.pem 1024
openssl rsa -in server.pem -outform PEM -pubout -out server.pub.pem

# Convert them to DER format
openssl rsa -in server.pem -outform DER -pubout -out server.pub.der
openssl rsa -in server.pem -outform DER -out server.der
rm server.pem server.pub.pem
cd ..

#Then, flash the new fs
make flash_fs FS_DIR=./root_fs

Create your sketch

To use the lib you must call it on setup and loop.

sample_project.ino 

#include <Arduino.h>
#include "domoio.h"
#include <FS.h>

void setup() {
  // This macro is needed to make sure that all the dependencies are loaded
  __FIX_COMPILER_ISSUES;

  // Internal LED
  Port *state_led = new Port();
  state_led->id = 16;
  state_led->port_type = PORT_DIGITAL;
  state_led->io = PORT_OUTPUT;
  state_led->active_low = true;
  setup_port(state_led);
  domoio::set_led_port(state_led);

  // Reset BTN
  Port *reset_port = new Port();
  reset_port->id = 0;
  reset_port->port_type = PORT_DIGITAL;
  reset_port->io = PORT_INPUT;
  setup_port(reset_port);
  domoio::set_reset_port(reset_port);

  // Relay 1
  Port *relay_1 = new Port();
  relay_1->id = D1; //
  relay_1->port_type = PORT_DIGITAL;
  relay_1->io = PORT_OUTPUT;
  relay_1->active_low = true;
  setup_port(relay_1);

  domoio::setup();
}

void loop() {
  domoio::loop();
}

Flash the firmware

make flash

Requirements

This is the recommended layout 

.
|-- axtls-8266
|-- esp8266
|-- domoio_esp8266

compile

cd domoio_esp8266
mkdir build
cd build
cmake -DESP_ROOT=$HOME/src/8266/esp8266 -DAXTLS_ROOT=$HOME/src/8266/axtls-8266/ ..
make

If you have followed the recommended project layout, then you don't need to set ESP_ROOT or AXTLS_ROOT, you can just do: 

cd domoio_esp8266
mkdir build
cd build
cmake ..
make